Follow the procedure below to ensure that you choose the right size.

MEASURE YOUR FOOT BY FOLLOWING THESE STEPS: :

Put a sheet of paper on the floor with the short side against the wall.
Put the sole of your bare foot on it with the heel pressing against the wall
Mark the point in front of the tip of your longest toe on the sheet of paper.
Measure the distance between the margin of the sheet of paper where you placed your heel and the point where you made the mark. Always round up the measurement to the next millimetre.
You may find that your right and left foot are different lengths. Always measure both of them and use the longest measurement as your reference.
If you are undecided between two sizes after consulting the table, we recommend that you opt for the larger size.

SOFT INSTEP CLOSURE SYSTEM - 4

The SOFT INSTEP CLOSURE SYSTEM is a wide, anatomically curved strap combined with a soft, thermo-formed EVA pad that distributes pressure evenly over the instep area. The SOFT INSTEP CLOSURE SYSTEM is adjustable from both sides, to perfectly center the EVA pad over a high or low instep. The system eliminates the need for the High Instep Extender. The SOFT INSTEP CLOSURE SYSTEM is replaceable.

SINGLE TECNO-3 PUSH SYSTEM

The central mechanism, SINGLE TECNO-3 PUSH SYSTEM, creates a perfect tension balance between the shoe’s internal and external side. The symmetrical mechanism guarantees an excellent closure adapting on every instep. An innovative button added to the monofilament buckle, if pushed, lifts the buckle to facilitate the adjustment.

Suola Vent Carbon

The VENT CARBON SOLE features a light and replaceable heelpad to improve walkability in polyurethane and a replaceable integrated toe pad/vent cover. The key benefits of the VENT CARBON SOLE are not only superior power transfer, because of its light weight and stiffness, but also warm weather comfort. The VENT CARBON SOLE is designed with an integrated vent and air channels for heat dissipation and air flow. The vent can be opened or closed for 4-season comfort. The VENT CARBON SOLE is handmade exclusively of carbon fiber in a weave pattern oriented at opposing angles that maximize stiffness while allowing for a small degree of controlled flex in the toe area. This carefully designed flex biomechanically relieves stress on the plantar tendon and helps promote circulation. The VENT CARBON SOLE features a standard 3-hole drilling pattern, printed 10 mm lateral and fore/aft cleat alignment scale as well as the Look Memory Eyelet® for easy cleat alignment and replacement. For triathlon, the vent also serves as a water drain, dramatically improving foot comfort after a wet transition.

Recommended